Nanjing Movelaser Technology Co., Ltd. and Jiangsu Blue Aspiration Technology Co., Ltd. have carried out close cooperation on many floating lidar wind measurement projects in China, and launched a number of Molas B300M offshore wind measurement lidars. The total service period is more than 24 months.
Since the cooperation between the two parties, the lidars of many offshore wind measurement projects have been operating normally and performed well. The average data integrity rate of each measurement altitude of the lidars of the projects that have been put into operation has exceeded 99%, which is our company’s offshore wind measurement lidar. The stability and reliability of Molas B300M provide a lot of data support and practical verification.
Blue Aspiration NX series floating lidar wind measuring device adopts Molas B300M lidar produced by Nanjing Movelaser Technology Co., Ltd. This lidar is based on the Molas B300, which is the only domestic wind-measuring lidar that has obtained the DNV-GL IEC classification certification.
Molas B300M not only has the characteristics of large range and high precision, but also further improves the protection level and anti-salt corrosion performance of the whole machine compared with onshore products, which can meet the harsh use environment at sea. Molas B300M lidar can be applied to various application modes such as pre-offshore wind measurement, wind power prediction supporting wind measurement for offshore wind power projects, etc. Since it was put into the market, as of March 2022, Molas B300M lidar has won a total of five buoy radars in China, Japan, India, and other countries, wind measurement of various offshore platforms, and power prediction of offshore booster stations. With the application performance of more than ten units, the average data integrity rate is over 98%. Currently, Molas B300M has been installed in many floating lidar wind measurement projects in China.
Data Availability of Molas B300M in Projects
The average data integrity rate of all measured heights of each device is over 99%. The data integrity rate of each measurement height of the equipment is higher than 96%, and most of the measurement heights are above 99% or even 100%. The specific integrity data is shown in the following figure: